Jenn-Air W11356996, Руководство по обслуживанию

Страница: 42 / 62

COMPONENT ACCESS
4-8
n
JennAir Built-in Coffee System
Before Disassembling the Coffee System
Preparation
Perform the following steps to prepare coffee system for
disassembly.
1. Slide the coffee system forward using the handles as shown
in following illustration.
2.
Press main On/Off switch (A) on the right hand side of the
coffee system to turn off the unit.
3. Unplug coffee system or disconnect power.
4.
Remove power cord from power cord clip in cabinet.
5. Remove all items from right and left storage trays, e.g., bags
of coffee beans, containers of ground coffee, sugar, creamer,
etc.
6.
If installed, remove hot water spout or milk container.
7. Remove water tank (B).
8.
Open service door (D) and remove drip tray (C) with coffee
grounds container (A).
9. Remove the four 4.2 x 9.5 mm screws securing the coffee
machine.
10.
Remove the coffee system from the runners and relocate to
an appropriate work surface.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
A
A
A. Handles
A
B
A. Main On/Off Switch
B. Storage Tray
A
B C
B
D
A
A. Coffee ground container
B. Water Tank C. Drip Tray
D. Service Door
B
C
A
A. Leveling spacers
B. Pins
C. Screws