Jenn-Air W11356996, Руководство по обслуживанию

Страница: 46 / 62

COMPONENT ACCESS
4-12
n
JennAir Built-in Coffee System
Removing the Grinder Assembly
1.
Complete the steps 1-3 from “Removing the Back Panel and
Side Panel” , prior to performing the following steps.
2. With a small screwdriver, remove the rubber cap from the
grinder knob. Remove the screw to disconnect grinder
adjustment knob.
3.
Lift up the grinder funnel to get access to the grinder
assembly.
4.
Disconnect the motor terminals from the control board
terminals “F1” and “F7.”
5. Lift up the grinder assembly and remove from the coffee
system.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
L L L L
N
F5
F7
F8
F9
J5
J7
J2
J8
J13
J6
J12
J4
J1
F4 F3 F2
F1
Grinder
Motor
Main
Board
F7