Jenn-Air W11356996, Руководство по обслуживанию

Страница: 43 / 62

COMPONENT ACCESS
JennAir Built-in Coffee System
n
4-9
Removing the Top Panel and Fan Panel
1.
Complete the preparation steps 1-10 from “Before
Disassembling the Coffee System” , prior to performing the
following steps.
2. Remove the screws from the upper part of the top panel.
3.
Remove the screw located on the right side of the coffee
system as shown below.
4.
Remove the two screws securing the fan assembly to the
front panel. Pull out fan assembly and see the step 5.
5. Disconnect the wire harness.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.