I
F
BAKED
FOOD
IS
BURNED
OR
TOO
BROWN
ON
TOP
:
•
Food may be positioned incorrectly in oven.
(See “C
ooking Made Simple”
booklet.)
•
Oven not preheated properly.
I
F
FOODS
BAKE
UNEVENLY
:
•
The oven may be installed improperly.
•
Check the oven rack with a level.
•
Stagger pans, do not allow pans to touch
each other or oven wall.
•
Check instructions for suggested place-
ment of pans on oven rack. (See “C
ooking
Made Simple”
booklet.)
I
F
OVEN
DOOR
WILL
NOT
UNLOCK
:
•
Oven may not have cooled to safe tempera-
ture after self-cleaning process.
I
F
OVEN
BAKING
RESULTS
ARE
LESS
THAN
EXPECTED
:
•
The pans being used may not be of the size
or material recommended for best results.
(See
“Cooking Made Simple”
booklet).
•
There may not be sufficient room around
sides of the pans for proper air circulation
in the oven.
•
Check instructions for preheating, rack
position and oven temperature.
•
Check oven temperature when convection
baking. Decrease conventional baking tem-
peratures by 25
°
F.
I
F
BAKING
RESULTS
DIFFER
FROM
PREVIOUS
OVEN
:
•
Oven thermostat calibration may differ
between old and new ovens. Follow recipe
and use the directions in this guide before
calling for service since the calibration on
the previous oven may have drifted to a too
high or too low setting. (See p. 4 - Adjusting
Oven Temperature.)
I
F
THE
COOLING
FAN
CONTINUES
TO
OPERATE
AFTER
THE
OVEN
HAS
BEEN
TURNED
OFF
:
•
This is normal. The fan will automatically
shut off when the oven is cooled.
14
F
OR
MOST
CONCERNS
,
TRY
THESE
FIRST
:
• Check if oven controls have been properly
set.
• Check if oven is properly connected to
electrical outlet.
• Check or re-set circuit breaker. Check or
replace fuse.
• Check power supply.
I
F
CLOCK
,
INDICATOR
WORDS
,
AND
/
OR
LIGHTS
OPERATE
BUT
OVEN
DOES
NOT
HEAT
:
•
Clock controls may be set for a delayed
bake function.
•
The Oven Control Lockout may have
been set. (See page 4.)
I
F
THE
OVEN
LIGHT
AND
/
OR
CLOCK
DOES
NOT
FUNCTION
:
• The light bulb is loose or defective.
• The oven light does not work during self-
cleaning process.
T
HERE
IS
A
STRONG
ODOR
OR
LIGHT
SMOKE
WHEN
OVEN
IS
TURNED
ON
:
•
This is normal for a new wall oven and will
disappear after a few uses. Initiating a clean
cycle will “burn off” the smells more quickly.
Turning on a ventilation fan will help re-
move the smoke and/or odor.
•
Excessive food soils on the oven bottom.
Use a self-clean cycle.
I
F
OVEN
WILL
NOT
ACTIVATE
THE
SELF
-
CLEANING
PROCESS
:
•
Check the “Clean” and “Stop” time set-
tings and the current time of day on the
clock.
I
F
OVEN
DID
NOT
CLEAN
PROPERLY
:
•
Oven may need longer cleaning time.
•
Excessive spills were not removed prior
to self-cleaning process.
I
F
FOODS
DO
NOT
BROIL
PROPERLY
:
•
Check rack position. (See page 7.)
•
Voltage into house may be low.
I
F
A
FAN
IS
HEARD
WHILE
USING
THE
BROIL
AND
CLEAN
MODES
:
• This is the cooling fan and is normal. The
fan will continue to run after use until the
oven cools.
I
F
PROBE
DOES
NOT
WORK
(
SELECT
MODELS
):
•
Check to be sure probe plug is properly
inserted into oven receptacle.
•
Probe may not be positioned in food
properly.
•
Probe temperature may have been im-
properly set.
I
F
CONVECTION
FAN
DOES
NOT
OPERATE
DURING
DRYING
(
SELECT
MODELS
):
•
Check that the magnetic door spacer was
correctly placed on the slightly recessed
circular area on the upper center of the
oven door. (See pages 9 and 10.)
F
AULT
C
ODES
•
Fault codes are shown in the display as “F”
and a number. If a fault code appears in the
display and beeps sound, press the
Can-
cel
pad. If the fault code and beeps con-
tinue after pressing
Cancel
, disconnect
power to the oven. Wait a few minutes,
then reconnect power to the oven. If the
fault code and beeps still continue, discon-
nect power to the wall oven and call an
authorized servicer.
•
If the oven is heavily soiled, excessive
flare-ups may result in a fault code during
a clean cycle. Press
Cancel
pad and allow
the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If
the fault code and beeps still continue,
disconnect power to the appliance and
call an authorized servicer.
•
If an error beep sounds (two short beeps)
with no fault code in the display, clean any
spill from key pad area within 30 seconds.
If, after 30 seconds the spill is not removed
or another problem exists, an F7 fault
code will be displayed. Disconnect power
to the appliance and call an authorized
servicer.
B
EFORE
Y
OU
C
ALL
FOR
S
ERVICE
