Page 9 of 28
Technical Support
1 866 228-3762
Systems Engineer
321-243-0600
18.
Run QuickCheck
Ensure that the Z-side loopback device has been setup, then select the
J-QuickCheck
tab, and tap
[Run J-QuickCheck]
to verify local and
remote test connectivity and available bandwidth.
19.
Run RFC 2544
Tap
[Run RFC 2544 Test]
. The T-BERD will loop up the far end unit,
and test Throughput, Delay, Jitter, and Frame Loss. The test will take 6
to 9 minutes to complete. At the conclusion of the test, the T-BERD
6000A will automatically loop down the far end JDSU loopback device.
20.
Save Results
At the conclusion of the test, enter Customer name, Technician Name,
Test Location, and Comments at the prompt. Select the Append option,
and tap
[Yes]
to save the test report to the T-BERD 6000A hard drive in
PDF format. The filename, including a time and date stamp, will be
displayed in the Progress log.
