JDS Uniphase T-BERD 6000A, Руководство по тестированию

Страница: 4 / 28

Page 4 of 28
Technical Support
tac@jdsu.com 1 866 228-3762
Systems Engineer Dave.Baker@jdsu.com 321-243-0600
2. RFC-2544 Test Procedures
The following procedures describe how to measure throughput, frame loss, round trip delay, and jitter
with the T-BERD 6000A in accordance with the RFC-2544 Metro Ethernet benchmarking
methodology.
Test procedures are described for:

Electrical and Optical handoffs

10Mbps, 100Mbps, and 1Gbps links

Layer 2 and Layer 3 IPv4 testing

JDSU T-BERD 6000A, T-BERD 5800, and HST-3000 loopback devices
Procedures are described for RFC-2544 Tests to verify throughput, round trip delay, jitter, and frame
loss SLA metrics. Technicians should follow procedure in one of the following sections, depending on
his location (A-side or Z-side) and whether he is using a T-BERD 6000A, T-BERD 5800, or HST-
3000 test equipment. The RFC-2544 test is run from the A-Side. The Z-side is placed in loopback.
Meter
A-Side Z-Side
T-BERD 6000A Section 2.1 Section 2.2
T-BERD 5800 Not applicable Section 2.3
HST-300 Not applicable Section 2.4