JDS Uniphase SWS15100, Руководство пользователя

Страница: 21 / 251

6 – Safety
Under the laser classification of the US Food and Drug Administration (FDA) Center for Devices
and Radiological Health (CDRH), the lasers contained in the system are Class I lasers.
CLASS 1
LASER PRODUCT
Class I lasers are safe under reasonably foreseeable conditions of operation. There can be more
powerful lasers inside the unit, but no harmful radiation can escape the enclosure.
Safety Instructions
The following safety instructions must be observed whenever the unit is operated, serviced, or
repaired. Failure to comply with any of these instructions or with any precaution or warning
contained in the user’s manual is in direct violation of the standards of design, manufacture, and
intended use of the unit. JDS Uniphase assumes no liability for the customer’s failure to comply
with any of these safety requirements.
Before Initializing and Operating the Equipment
þ
Inspect the equipment for any signs of damage, and read the user’s manual thoroughly.
þ
Install the equipment as specified in the Getting Started section.
þ
Ensure that the equipment and any devices or cords connected to it are properly grounded.
Operating the Unit
Warning
To avoid the risk of injury or death, always observe the following precautions
before initializing the equipment:
•
Never look into the end of an optical cable connected to an optical output
device that is operating. Laser radiation is invisible and direct exposure can
severely injure the human eye. For more information, see the user’s manual
of the laser source in use.
•
If using a voltage-reducing autotransformer to power the system, ensure that
the common terminal connects to the earthed pole of the power source.
•
Connect the power cord only to a power outlet equipped with a protective
earth contact. Never connect to an extension cord that is not equipped with
this feature.
•
Turning off the power switch does not always block the externally supplied
power to the connector at the output of the unit.
•
To prevent potential fire or shock hazard, do not expose the unit to any
source of excessive moisture.
•
Do not use the unit outdoors.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com