JDS Uniphase OneExpert DSL, Руководство пользователя

Страница: 25 / 120

Chapter 2 Quick Tour
Exploring the connector panel
OneExpert DSL User’s Guide
April 2014 22052280, Revision 001
9
Exploring the connector panel
The connector panel is located on the right side of the instrument and under a rubber flap. When
the connectors are not being used, place the rubber flap over the connector panel to keep out dust
and rain. Use the connector panel to connect the OneExpert DSL to the line under test.
Figure 4
shows the connector panel.
USB connectors
The USB connectors are used for connecting Smart IDs, exporting test results to a flash drive, or
for performing firmware upgrades from a flash drive.
POTS connector
The POTS connector is used for:
• HPNA testing on twisted pair
• POTS testing
Network connectors
Two Ethernet/Network ports are used to connect to Ethernet networks which allows synchronizing
with StrataSync, upgrading software, and remotely connecting to the OneExpert DSL.
ERJ45 Wiring connector
The RJ45 Wiring connector is used for:
• Ethernet Ping
• RJ45 wire ID
Figure 4 OneExpert DSL connectors right panel
xDSL connector