JDS Uniphase OneExpert DSL, Руководство пользователя

Страница: 70 / 120

Chapter 7 Testing with SmartIDs
About the SmartID tests
OneExpert DSL User’s Guide
54
22052280, Revision 001 April 2014
About the SmartID tests
The purpose of the SmartID tests are to test and map cables/wires,
verify that the HPNA links and
devices are installed and fully provisioned, and to verify that the entire HPNA network is operating correctly
To access the wiring tools
• From the main menu, select Smart ID .
Locating SmartIDs
The purpose of this test is to identify up to 16 the SmartIDs on the network. The SmartIDs will work
through splitters, and multiple SmartIDs can be detected simultaneously.
To locate SmartIDs
1 Connect SmartIDs ( Figure 10 ) to the coax at any location in the home where network qualifi-
cation or troubleshooting is desired, such as set top boxes or residential gateways (see
Figure 12 for examples).
2 Connect the USB cable from OneExpert DSL to one of the SmartIDs.
3 On the SmartID menu, select Locate IDs .
If this is the first test with the Smart IDs, a warning message appears asking you to register
the SmartIDs.
Figure 10 SmartID