JDS Uniphase OneExpert DSL, Руководство пользователя

Страница: 35 / 120

Chapter 3 Utilities
Specifying system settings
OneExpert DSL User’s Guide
April 2014 22052280, Revision 001
19
The Ethernet connection is established.
Viewing the device interface on the PC
After you have established an Ethernet connection, you must launch the VNC program to view the
device interface.
To view the device interface on the PC
1 Launch the VNC viewer on the PC.
2 In the viewer’s server address field, type the OneExpert DSL's IP address, and then select
OK .
A password entry box appears.
3 Enter the VNC password (found on the Remote Operation menu) and then click OK or press
Enter.
The OneExpert DSL user interface appears in the VNC viewer.
4 To use a PC or laptop keyboard with the OneExpert DSL’s user interface, see “Using a PC
keyboard” on page 19 .
5 If the message, “Failed to connect to server” appears, the VNC viewer was not able to commu-
nicate with the OneExpert DSL. If this happens, try the following solutions:
– Make sure you are using the correct IP address for the OneExpert DSL.
– From the PC or laptop, ping the OneExpert DSL IP address to verify the network link is
working. If the link is not working, restart the OneExpert DSL and repeat step 1 through
step 2 .
Using a PC keyboard
After you have connected to the OneExpert DSL from a laptop or PC using the VNC viewer, you
can use the computer’s mouse or keyboard to control the OneExpert DSL.
Table 3 shows how the
PC/laptop keys map to the OneExpert DSL keypad.
VNC availability
The VNC program can control the following functions:
Table 3 PC/laptop to OneExpert DSL key map
PC/Laptop key OneExpert DSL Keys
F1 through F4 Correspond to the OneExpert DSL system keys
F5 Home
F6 Tray menu
F7 AutoTest
Escape Cancel
Enter OK