JDS Uniphase OneExpert DSL, Руководство пользователя

Страница: 44 / 120

Chapter 3 Utilities
Managing jobs
OneExpert DSL User’s Guide
28
22052280, Revision 001 April 2014
4 Touch the Start button.
As the process runs, the sync state is displayed in the lower left.
• Upon synchronization with the StrataSync server, the unit will send to the server the following
information:
–
The unit’s serial number.
– The unit’s hardware information - constituent assemblies and their revision levels.
– The unit’s MAC address.
– The unit’s User settings - name (user/technician) and ID.
If the configuration information contained on the server is newer than that on the unit, the
server will be considered to be the most up-to-date.
• The server will then send any files to the unit being synchronized that it determines are newer
than those on the unit.
• The unit will then send any Reports, Configuration profiles, screen shots, etc. that have been
saved on the unit since the last configuration.
• The server then applies any applicable Options to the unit.
• Lastly, if any upgrades are available, the user will be informed of their availability and asked to
verify their desire to receive the upgrade.
When synchronization is complete, the Status will indicate “Sync Complete”. The unit may be
disconnected from the server.
Managing jobs
The Job Manager is used to associate test results from different applications (for example HPNA,
Optical Power Meter, DSL, and Copper Pair Check) to a single job. If any jobs have been saved,
they appear in the list. The Job Manager allows you to setup a new job, edit an existing job, activate
a job, or delete a job.
To manage jobs
1 From the System menu ( Figure 8 on page 16 ), touch the Job Manager button.
If any jobs have been created, they will be listed on the screen.
2 To create a new job, touch the New button, and then enter the work ticket, BAN, and UUID.
3 To edit an existing job, highlight the job you wish to modify, select the Actions system key,
and then select Edit Job .
4 To select multiple jobs (to activate, export, or delete)
Lookup Server Name Enter the server name.
Setting Description
NOTE:
If an Option Code was entered as a part of synchronization, power must be cycled to the unit to
complete the process and initialize the option.