Chapter 2
DSAM Navigation
The Keypad
8
DSAM Help User Guide
Rev. 001
The Keypad
Softkeys
To open the menu item (on the screen), press any of the four softkeys
located under the screen.
Exit Key
To leave the screen or function you are currently viewing, press the
crescent-shaped
EXIT
key (located to the left of the arrow keys).
Enter Key
To affirm or input data and to execute tasks in each mode, press the
crescent-shaped
ENTER
key (located to the right of the arrow keys).
Arrow Keys
Using the arrow keys, select softkey pop-up menu options, select
mode options, move the cursor, and adjust the view (on some
screens).
Mode Keys
To directly access functions within one of the following modes, press
one of the round mode keys.
– AutoTest
– Measure
– Access
– Configure
Alphanumeric
Keypad
Use the alphanumeric keys to enter numeric values, letters, and
spaces. Where applicable, repeat presses of the same key cycle
through the characters (such as 2, then a, then b, then c, then 2, etc.).
Shift Key
Press the
blue shift
key before pressing an alphanumeric key to
access the shortcut option associated with the alphanumeric key.
Icons associated with each shortcut are located below the alphanu-
meric key.
NOTE
Press the
blue “Shift”
key to change these menu items to mea-
surement mode softkeys, then press the corresponding softkey to
go directly to that measurement mode. For more information, see
.
21128026 R001 DSAM Help User Guide.book Page 8 Thursday, February 5, 2009 2:02 PM
