Chapter 7
AutoTest Mode
AutoTests Tab
120
DSAM Help User Guide
Rev. 001
Understanding
Combo Test Results
Viewing Combo Test
Results
Video Summary View (Default)
To display the video summary view
1
Press the
View
softkey.
2
Using the arrow keys, select
Video Summary
.
Figure 111
AutoTest – Combo AutoTest Results
Table 40
Home Certification Test Results
Name
Description
Overall Results
This area displays the overall pass/fail results for
the test, the limit set applied (if applicable), and the
currently selected channel.
Individual Test
Results
This area displays the results of individual tests for
the currently selected channel. When a measure-
ment falls outside the acceptable range, an arrow to
the right of the numeric value indicates the direction
in which the failure occurred. An up arrow indicates
a measurement over the limit range. A down arrow
indicates a measurement below the limit range.
Channel Results
A symbol indicating whether the channel passed or
failed the overall test.
Overall Results
Overall Channel Results
Individual Test Results
NOTE
Only valid measurements resulting from completed tests are dis-
played. When an error occurs prohibiting a valid measurement, a
dash indicates an invalid numeric value.
21128026 R001 DSAM Help User Guide.book Page 120 Thursday, February 5, 2009 2:02 PM
