Chapter 7
AutoTest Mode
AutoTests Tab
DSAM Help User Guide
Rev. 001
123
5
Using the arrow keys, select
Channel Plan
.
6
Press
ENTER
.
7
Using the arrow keys, select an
option
.
8
Press
ENTER
.
9
Using the arrow keys, select
Limit Plan
.
10
Press
ENTER
.
11
Using the arrow keys, select an
option
.
12
Press
ENTER
.
Figure 115
AutoTest – Video AutoTest
NOTE
To perform the test without checking the results against limit values,
select Off.
If you select Off as the Limit Plan value, no pass/fail information is
displayed in the test results.
NOTE
“Regional Preferences” on page 43
to specify the type of signal
level units and digital performance units to display.
Use
to edit limit set parameters to meet
your needs.
Use
to define the best measurement
settings (such as DOCSIS settings) for your current work practices.
21128026 R001 DSAM Help User Guide.book Page 123 Thursday, February 5, 2009 2:02 PM
