1
We appreciate the confidence you have shown in JBC by purchasing this
thermoregulated soldering station. It has been manufactured with the highest
standards of quality to ensure reliable service. Before starting up the apparatus,
we suggest you to read through the following instructions carefully.
ENGLISH
TEMPERATURE CONTROL
The tip temperature is selected by placing the
control according to the graduated scale.
Wait for the pilot light to flash regularly, meaning
that the pre-set temperature has been reached.
The soldering iron has a large power reserve
allowing rapid temperature recovery while being
used.
RECOMMENDATIONS FOR SOLDERING
-
The components and the circuit should be
cleaned and degreased.
-
Preferably select a temperature below 375°C.
Excess temperature may cause the printed
circuit tracks to break loose.
-
The tip must be well tinned for good heat
conduction. If it has been inoperative for any
length of time, it should be retinned.
FEATURES
Stations composition
SL 2300
230V:
Ref. 2300200
SL 2300
120V:
Ref. 2300100
-
Analogue Control Unit and
40W
soldering iron
-
Long-Life Tip R-10D:
Ref. 0300905
-
Soldering iron stand US 1000: Ref. 0290100
-
Instrucctions manual:
Ref. 0395470
Technical data
-
Solid-state, electronic temperature control,
with zero-point thyristor triggering.
-
Temperature range:
100...400°C ±10%
-
Time for 300°C:
40 s
-
Weight without cable:
50 g
-
Power reserve:
200 W
-
This station does not include a low-voltage
transformer.
Temperature
selector
Soldering
cable outlet
