Jayco PINNACLE, Руководство пользователя

Страница: 95 / 187

85
E
LECTRICAL
S
YSTEM
To start the generator manually
1. Press the operation control switch to start the generator. (Depending on how cold it is,
preheat can take up to 15 seconds).
2. The hour meter will monitor minutes of usage when the generator is running.
3. Before stopping the generator, turn off air conditioners and large electrical loads and
allow the generator to run 3 to 5 minutes to cool down. Flip the red start/stop switch
to stop.
For top performance and engine life, especially in colder weather, let the generator engine
warm up for two minutes before connecting (turning “on”) appliances.
Maintenance
With the exception of simple items such as normal maintenance (i.e., oil changes, etc.), all
service work should be done by a repair facility authorized by the generator OEM. Improper
adjustments can damage the generator and electrical appliances, and can result in a safety
hazard. If any discrepancy or problem is noted, contact your dealer for assistance.
Exercising Your Generator – it’s also very important to run your generator regularly, to keep
Excessive cranking can overheat and damage the generator starter motor. Do
not crank for more than 20 seconds at a time. Wait at least two minutes before
trying again. If the generator does not start after the third try, refer to the
generator manufacturer’s user manual for more information.
%#76+10
CARBON MONOXIDE IS DEADLY! MOVING PARTS AND
ELECTRICITY
can cause severe personal injury or death. To reduce
exposure to these hazards, always disable AGS (if so equipped) before:
Sleeping in vehicle, unless vehicle has a working CARBON MONOXIDE
detector.
3DUNLQJYHKLFOHLQJDUDJHRUFRQ¿QHGVSDFH
Parking vehicle for storage.
Servicing vehicle for storage.
Servicing generator.
Servicing batteries.
Servicing appliances or electrical systems.
Fueling the vehicle.
DO NOT run the generator or use the AGS AUTO ON or QUIET ON
PRGHVLIVRHTXLSSHGZKHQ\RXU59LVLQGRRUVRULQDFRQ¿QHGVSDFH
.
Asphyxiation or carbon monoxide poisoning hazards exist whenever generator
exhaust gasses can accumulate.
9#40+0)
Table of Contents Table of Contents Maintenance Record Maintenance Record