Jayco PINNACLE, Руководство пользователя

Страница: 136 / 187

126
P
LUMBING
S
YSTEM
Sewer Hose Storage:
Depending on your RV model, the sewer drain hose may be stored in an exterior compartment
marked “Sewer Hose” or it may be located in the hollow square tube bumper. The bumper
has removable plastic end caps, and the hose slides inside the hollow bumper.
W
INTERIZING
A
PPLIANCES
Winterize Frigidaire Residential Refrigerator: (FGHC2331PFAA)
Blow out water line – do not use antifreeze in this refrigerator.
1. Drain water out of the fresh water tank.
2. Place the water valves in the CITY WATER position at the utility center.
3. Connect a regulated air supply (30 PSI Maximum) to a blowout plug attached to the
city water connection at the utility center. Blow out the water lines.
WARNING: RECOMMENDED AIR PRESSURE IS 30 PSI MAXIMUM.
While still blowing air into the water lines:
4. Open the kitchen water faucet and drain water out of the hot and cold water lines.
5. Open the bathroom faucet and drain water out of the hot and cold water lines.
6. Repeat step #4 again verifying that all water has been purged from the cold water lines.
7. Activate the water dispenser on the refrigerator and purge all water from the refrigerator
water line until only air comes out of the dispenser.
8.
5HPRYH WKH UHIULJHUDWRU ZDWHU ¿OWHU DQG H[WUDFW ZDWHU RXW RI WKH ¿OWHU XVLQJ D VZLIW
³ZULVWÀLFN´PRWLRQOLNHÀLFNLQJZDWHURXWRIDSDLQWEUXVK
9.
5HLQVWDOOWKHZDWHU¿OWHUDQGDFWLYDWHWKHZDWHUGLVSHQVHUDJDLQYHULI\LQJWKDWDOOZDWHU
KDVEHHQSXUJHGIURPWKH¿OWHUDQGWKHGLVSHQVHU
Use a timepiece for the following steps:
10. Remove the ice cube bin, and the ice cream shelf and depress and hold the icemaker
manual momentary override switch to the ON (-) position for 15 seconds.
11. After releasing the override switch, wait 2 minutes
and 30 seconds and verify that water blows out of
WKH LFHPDNHU ZDWHU ¿OO SRUW 7KLV SXUJH SURFHVV
only lasts a few seconds and begins precisely 2:30
after releasing the switch.
12. Wait a minimum of 15 seconds after the purge
process is complete and repeat step #11 one more
WLPH WR YHULI\ WKDW DOO ÀXLG LV SXUJHG IURP WKH
icemaker.
13. Turn the icemaker power to the OFF position.
14. Remove all ice cubes from the ice cube bin and
dispenser.
15. Remove all water from the icemaker tray.
16. Dry off the icemaker and freezer cavity to prevent mold formation.
17. Turn water supply line to the refrigerator OFF before attempting to install antifreeze in
the RV water lines.
18. Prop open the doors of the refrigerator to prevent mold formation or odors.