Jayco PINNACLE, Руководство пользователя

Страница: 57 / 187

47
V
EHICLE
O
PERATION
Leveling control panel callouts
A Up arrow - scrolls up through the menu on LCD
B Down arrow – scrolls down through the menu on LCD
C
Enter – Activates modes and procedures indicated on LCD
D
Retract – places leveling system into retract mode. Press and
hold down for (1) second to initiate auto retract
E LCD display – displays procedures and results
F Auto level – places leveling system into auto level mode.
G Front jack button – activates front jacks in manual mode
H
Left jack button – Activates left jacks in manual mode
I Right jack button – activates right jacks in manual mode
J Rear jack button – activates rear jacks in manual mode
K
Power button – turns leveling system on and off
Basic Jack Operation
Landing gear jacks can be operated any time the system is “ON”. By pushing the “FRONT”
button, both front or landing gear jacks can be extended. By pushing either the “FRONT”
and “LEFT” or “FRONT” and “RIGHT” buttons, the individual front jacks can be extended.
If the touch pad is put in the retract mode, indicated by the orange illuminated LED next to
the “RETRACT” button, the front jacks can be retracted together by pushing the “FRONT”
button or individually by pressing “LEFT” or “RIGHT” buttons, while simultaneously
pressing the “FRONT” button.
The rear jacks con only be extended when the touch pad is in the manual mode. Once
system is in manual mode, pressing the “REAR” button will extend both rear jacks at the
same time. To extend individual rear jacks, press the “LEFT” or “RIGHT” button while
simultaneously pressing the “REAR” button, depending on which jack needs to be operated.
If the touch pad is put in the retract mode, indicated by the orange illuminated LED next to the
“RETRACT” button, the rear jacks can be retracted together by pushing the “REAR” button
or individually by pressing wither the “LEFT” or “RIGHT” buttons while simultaneously
pressing the “REAR button.
NOTE:
Middle jacks can only be operated in error mode. In order
to engage middle jacks, press “LEFT” and “RIGHT” buttons simulta-
neously.
47
NOTE:
If the rear jacks will not operate individually using the
method described above, but the operate properly when Auto Level is
performed, the Twist Prevention Protection system has locked out the
operation to prevent damage to the frame of the unit.
Table of Contents Table of Contents Maintenance Record Maintenance Record