61
Ignition – Propane Gas Operation
1. Open the valve at the propane gas storage tank.
2. Turn the thermostat (A) to the 5 position.
3. Turn the selector switch (B) to the propane gas position ( ).
4. Push and hold in the safety valve (C) for about five seconds.
• The refrigerator automatically ignites the gas at the burner.
WARNING: Do not hold in the safety valve for more than 30 seconds. If there
is no flame in this time, wait at least five minutes before you try ignition again.
If you continue to hold in the safety valve, gas will collect in the burner area.
This could cause a fire or explosion and result in dangerous personal injury or
death.
•
When a flame is present and the flame indicator (D) illuminates, release the
safety valve.
•
If the flame indicator does not illuminate, do this step again.
5. Turn the thermostat to the temperature setting that you wish.
Start Up – AC Operation
1. Make sure that 120 volts AC is available.
2. Turn the selector switch to the AC position (
).
3. Turn the thermostat to the temperature setting that you wish.
Start Up – DC Operation
1. Make sure that 12 volts DC is available.
2. Turn the selector switch to the DC position (
).
3. Turn the thermostat to the temperature setting that you wish.
Shut Down
1. Turn the selector switch to the OFF position (
).
Содержание Kiwi
