7
General
information
Getting
Started
Operation
Starting to
Print Cards
Cleaning
Trouble
Shooting
Technical
Specifications
Rev. 1.3
OPERATION
3.
Load ribbon onto the supply spindle (under printhead
carriage) and empty core (with tape attached)
onto the take-up spindle. Make sure the ribbon
comes off the top of the supply spindle and feeds to
the top of the take-up spindle.
4.
Push down on the print head lock lever until an
audible 'click' signals the locked-down position.
Please note that the ribbon automatically
synchronises whenever the printhead is
locked down.
5.
Close cover.
Please note that the ribbon automatically
synchronises whenever the printhead is locked down.
The card flipper will not operate and an error will
be indicated if you try to flip a card when the cover
is open.
