45
PCI-Auto: The onboard BIOS auto-detects which PCI
slot has an IDE card inserted in.
PCI-slotX: Some old PCI IDE cards cannot be detected
by the BIOS. If the onboard BIOS cannot detect a PCE
IDE card, you have to specify on which PCI slot the IDE
card is inserted, to make the BIOS assign IRQ14 for use
by the interrupt number (INT#) of this PCI slot.
ISA: If you select ISA, it means that your PCI IDE card
features a “paddleboard” and a cable that can be
connected to IRQ on the ISA slot, because the BIOS will
not assign any IRQ to this PCI slot.
Attention:
Primary Channel and Secondary Channel : The
BIOS needs two independent interrupt number
(INT#) lines to be allocated to the PCI IDE card.
Be careful not to choose twice the same interrupt
number (INT#).
Assign IRQ for PCI VGA :
You can assign IRQ for PCI VGA or not .
On Board FDD Controller:
This is to Enable or Disable the Onboard FDD Controller.
On board Serial Port 1:
This is used to specify the I/O address and IRQ of Serial Port
1. Ten options are available: Disable, 3F8h/IRQ4,
2F8h/IRQ3, 3E8h/IRQ4 or
2E8h/IRQ3.3F8h/IRQ10,
2F8h/IRQ11, 3E8h/IRQ10, 2E8h/IRQ11, and AUTO.
On board Serial Port 2:
