31
Quick power on self test:
After the computer has been powered on, the BIOS of the
mainboard will run a series of tests in order to check the
system and its peripherals. If the Quick power on self test
feature is Enable, the BIOS will simplify the test procedures
in order to speed up the boot process. The default is Enable.
Boot Sequence:
When the computer boots up, it can load the operating system
from floppy drive A:, hard disk drive C:, SCSI disk drive or
CD-ROM. There are many options for the boot sequence:
A, C, SCSI
C, A, SCSI
C, CD-ROM, A
CD-ROM, C, A
D, A, SCSI (at least 2 IDE HDD can be used)
E, A, SCSI (at least 3 IDE HDD can be used)
F, A, SCSI (at least 4 IDE HDD can be used)
SCSI, A, C
SCSI, C, A
A, SCSI, C
LS120, C
Swap Floppy Drive:
This item can be set as Enable or disable.
When this feature is enabled, you don’t need to open the
computer case to swap the position of f loppy disk drive
connectors. Drive A: can be set as drive B:, and drive B: can
be set as drive A:.
Boot Up Floppy Seek:
When computer boots up, the BIOS detects if the system has
FDD or not. When this item is enabled, if the BIOS detects
