Japan Radio Co. JSS-2150, Руководство по обслуживанию

Страница: 65 / 160

SETUP AND ADJUSTMENT
2-5
2.2 Using the field maintenance menu
2.2.1 Turning on the field maintenance mode
CAUTION
In the field maintenance mode, all DSC functions including distress alert cannot
be used. So when setup is complete, always restart by powering off and on
using breakers, or place the system in sleep mode.
If the equipment is left without operating in this mode, the maintenance mode off
timer automatically put the system into sleep mode.
Turn on the field maintenance mode by following the procedure below.
1
1
1
.
.
.
Turn on the transceiver's breaker and start in user mode.
Note1. When the equipment is first started after installing, the following screens appear. But this
is not a malfunction. The screens no longer appear after setting correctly and restarting.
z
Unregistered MMSI alarm
ENT
z
Controller address duplication alarm
ENT
Note2. On the controller address duplication alarm, when a controller is entered a new address,
that controller is restarted automatically but another one is not restarted. So turn off/ on
the equipment immediately by breakers or by continuously pressing key for 6 sec.
D e t e c t e d M M S I l o s t !
S o c o n c e r n e d D S C f u n c t i o n s
n o l o n g e r a v a i l a b l e n o w .
( P l e a s e c o n t a c t o u r s e r v i c e
c e n t e r / a g e n t s . )
[ O K ]
[ O K ]
D e t e c t e d t h i s c o n t r o l l e r ' s
a d d r e s s s e t t i n g e r r o r !
S o r e q u i r e d i n i t i a l s e t
a f t e r r e s t a r t i n g a s t h e
m a i n t e n a n c e m o d e .
( P l e a s e c o n t a c t o u r s e r v i c e
c e n t e r / a g e n t s . )
[ O K ]
[ O K ]
PW R
CONT
F 1 . 3 ) C o n t r o l l e r s e t t i n g s
1 . A d d r e s s : 1
2 . M a i n t e n a n c e m o d e o f f t i m e r
: 1 0 m i n
3 . F S I : I n v a l i d
0 . B a c k
1 . A d d r e s s