Japan Radio Co. JSS-2150, Руководство по обслуживанию, Страница: 113 / 160

Maintenance
4-15
4.3.1 Normal upgrade
Upgrade procedure
(1) Connect a notebook PC to the NCM-2150 controller as follows and then turn on the notebook PC.
(2) Start the JSS-2150 in maintenance mode.
(3) On the F3. Software upgrade screen on the maintenance menu, select the baudrate, connector,
and target unit as follows.
● Baudrate
Select the communication speed with the
connected notebook computer from 38.4 k,
57.6 k, or 115.2 k.
● Connector
Select the connector for connecting the
notebook PC.
Controller handset:
Front
Controller rear (Dsub 9-pin): Rear
● Target unit
Select the equipment to be upgraded.
Controller:
Controller
Unit inside the transceiver: Transceiver
(4) Press ENT on Execute and the "OK to upgrade?" popup screen appears. Select OK and press
ENT to display the following screen that indicates the equipment is waiting for a software upgrade
from the notebook PC.
* The following is an example when upgrading the PA. The "Current status…" changes depending
on the status of progress, in the following order: Ready (preparation finished), Loading
(transferring), and Succeeded (upgrade finished).
- S o f t w a r e u p g r a d e m o d e -
T a r g e t u n i t : T r a n s c e i v e r
B a u d r a t e : 3 8 . 4 k b p s
C o n n e c t o r : F r o n t
C u r r e n t s t a t u s . . . R e a d y