Japan Radio Co. JSS-2150, Руководство по обслуживанию

Страница: 64 / 160

SETUP AND ADJUSTMENT
2-4
2.1.3 Settings
Configure the following initial settings according to the installation conditions.
z
MMSI registration (Menu F1.1.1 ID setup)
z
Tx power for each band (Menu F2.3.1.1 TX band power adj.)
z
Settings for Tx power of each user channel (Menu F2.3.1.2 TX CH power adj.)
z Printer setup and operation check (Menu 7.6 Option)
z
Detection settings DC operation (for Menu F1.2.4.1 AC/DC detection)
z
Inmarsat C parallel operation settings during DC operation (Menu F1.2.4.2 BATT use set)
z
Register the unit's serial number (Menu F1.1.2 Serial number)
z RMS connectivity settings (Menu F1.4 Remote maintenance)
z Connectivity settings for two controllers (Menu F1.3.1 Address)
z
Connectivity settings for DMC or simple AME (Menu F1.2.1.1 DMC)
z
AME connectivity settings (Menu F1.2.1.3 AME)
The following can be set as necessary.
Caution: Setting "GPS alarm" to off means non-compliance with international standards (ITU-R
recommendation). Do not set it off, except for special ships. Additionally, setting "ATU use"
to off means the invalidation of all DSC functions including distress alert. Do not set it to off
unless using it as an SSB radiotelephone.
z
WKR watch settings during RF transmission (Menu F1.2.2.1 WKR BK)
z
DSC class B settings for A1 area navigation (Menu F1.2.2.2 DSC class)
z
Auto sleep timer in the field maintenance mode (Menu F1.3.2 Maintenance mode off timer)
z
GPS alarm settings (Menu F1.2.1.2 GPS)
z ATU connectivity settings for the SSB mode (Menu F1.2.3.1 ATU use)
z
RBK OFF timer setting
z
TX power for the antenna tuning