Japan Radio Co. JSS-2150, Руководство по обслуживанию

Страница: 81 / 160

SETUP AND ADJUSTMENT
2-21
2.2.5.10 Initializing stored information
Initialize each unit and item, resetting them to their factory defaults.
z
ATU/PA data
Initialize items selected from the ATU and
PA stored information below.
* In any situation, moving the cursor to
Initialize on the screen (see right)
displayed after selecting items and
pressing ENT initializes the items (same
for other items).
Power reduction, Tune power: User
Tx power for each band: Power
Antenna matching information: Matching
All ATU/PA save data: All
Note: The following are initialized when All
is selected.
The above User items, BATT use set,
RBK duration, TX delay, Model power,
ATU setting, RX antenna, AC/DC
detection
z
TRX data
The selected content below is initialized for
TRX stored information.
Mode, CH, TRX Frequency, AGC,
ATT, NR, SQL, CW BW: User
All TRX stored information: All
Note: The following are initialized when All
is selected.
The above user items,
Speech-processor, AGC setting, RX
busy, RF through
z
MODEM data
The selected content below is initialized for
WKR MODEM stored information.
DSC logs, DSC/WKR condition,
Diagnosis log(transceiver): User
All WKR MODEM stored information: All
Note: The following are initialized when All
is selected.
The above user items, Port settings,
DSC/WKR setting,
Remote maintenance, Serial number
(Example of ATU/PA data - User selected)
(Example of ATU/PA data - All selected)