Japan Radio Co. JSS-2150, Руководство по обслуживанию

Страница: 114 / 160

Maintenance
4-16
(5) Launch the PC application software (JSS-2150 FLASH Writer x.x.exe) on the notebook PC.
(6) Select the RS-232C Com port on the notebook PC and select the same communication speed set
earlier for the baudrate.
(7) Select the target unit to upgrade by the Target pull-down menu. Note that if a controller program
error is occurred and the controller upgrading is performed on the boot program displayed as
shown in the following right, always select CNT (ID=1) regardless of the address of that controller.
* PA is selected for this example.
【
Startup screen of the boot program
】
[ C o n t r o l l e r ]
C h e c k s u m c o m p a r i n g e r r o r .
P l e a s e r e - i n s t a l l t h e
p r o g r a m a g a i n n o w .
T a r g e t u n i t : C o n t r o l l e r
B a u d r a t e : 3 8 . 4 k b p s
A f t e r l o a d i n g t h e p r o g r a m ,
p r e s s D I M & P W R a t o n c e .