Japan Radio Co. JSS-2150, Руководство по обслуживанию

Страница: 66 / 160

SETUP AND ADJUSTMENT
2-6
2
2
2
.
.
.
Press DIM and PWR/CONT simultaneously to enter sleep mode.
3
3
3
.
.
.
Holding down the MENU key, press the PWR/CONT key. An alarm is sounded and the
equipment is turned on in the field maintenance mode.
Remark 1: The alarm volume is adjustable by the menu 7.3.2.2 Notification level.
Remark 2: Pressing and holding the PWR/CONT key for over 6 seconds restarts the equipment.
Release the PWR/CONT key as soon the alarm sounds.
Remark 3: The status display after startup is the same as in user mode. After pressing MENU to
display the menu screen, use the jog dial to scroll past 0. Back to display the menu
for the field maintenance mode. Display is also possible by selecting the item
numbers on each menu. For example, to select F1.1 Registration, press the MENU Æ
FUNC Æ 1 Æ 1 keys.
2.2.2 Exiting the field maintenance mode
The field maintenance mode is exited when the equipment enters sleep mode.
Note: When two controllers are connected and if putting only one of the controllers into sleep mode,
the field maintenance mode is continued. In this case, place the system in sleep mode by
pressing the DIM and PWR/CONT keys simultaneously on the controller with access rights
(displaying no OCC mark) to display the following popup screen. Then, select EQP with the
cursor and press ENT.