Japan Radio Co. JMR-7230-S3, Инструкция по эксплуатации

Страница: 374 / 576

Appendix C Setting the Inter switch C-8
[6] [Edit name] button
When this button is clicked, a dialog box is displayed for changing the names of the radar antennas
and display units.
Regarding the operations in the [Edit name] dialog box, refer to "C.2.5 Changing the name of radar
antenna or display unit".
[7] [Save/Load file] button
When this button is clicked, the [Connection pattern file operation] dialog box is displayed.
The current connection pattern can be saved in the file or the connection pattern that has been saved
previously can be loaded.
For details of the [Connection pattern file operation] dialog box, refer to "C.2.6 Using the set connection
pattern".
C.2.3.1 About equipment defect mark ( ) and error notification
mark ( )
■ Equipment defect mark
This mark is displayed when the power supply of the radar antenna or the indicator unit is OFF or
faulty.
Check the cause and take corrective action.
■ Error notification mark
This mark is displayed when there is some error in the settings of a radar antenna or a display unit.
Check the cause and take corrective action.
Cause Countermeasure
The master display unit does not exist or is faulty
although the slave display unit is connected. Connect the master display unit.
The master or slave display unit that is
connected is not permitted to be connected to a
radar antenna. Check the setting by selecting [Service] -
[Installation] - [Settings] - [Inter switch] on the
menu and permit the connection to the display
unit or connect another display unit whose
connection to the radar antenna is permitted.