Japan Radio Co. JMR-7230-S3, Инструкция по эксплуатации

Страница: 356 / 576

Appendix B Alert, Maintenance INFO and Permanent information B-62
Message Explanation Advice
Sea TEMP(invalid)
There is a format error or
a status error of the Water
temperature data.
Check the sensor condition. Switch to a
sensor in good condition, if available.
Sea TEMP(invalid)
There is a format error or
a status error of the Water
temperature data.
Check the sensor condition.
Sea TEMP(invalid)
There is a format error or
a status error of the data.
Check the sensor condition.
Sea TEMP(unavailable)
The Water temperature
data cannot be received.
Check the condition of the sensor and the
communication path. Switch to a sensor in
good condition, if available.
Sea TEMP(unavailable)
The Water temperature
data cannot be received.
Check the condition of the sensor and the
communication path.
Sea TEMP(unavailable)
The data cannot be
received.
Check the condition of the sensor and the
communication path.
Ship's
clock(Communication
failed, Main LAN)
Communication with
Ship's clock cannot be
performed via Main LAN.
Check the condition of Ship's clock and Main
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Ship's
clock(Communication
failed, Sub LAN)
Communication with
Ship's clock cannot be
performed via Sub LAN.
Check the condition of Ship's clock and Sub
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
S-J I/O <->
AP(Communication
error)
S-JOY detected a
communication error with
AP.
Check AP.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.