FJ200 -CT USER`S MANUAL
V3.0
Page 9
Electrical connection
Before connection of device on electrical network, make sure that data on name label matches
with voltage of power supply. Also connect the kettle housing to the ground – earthing
connection.
NOTE: Version for non European market is supplied without electrical socket! Only trained
personnel may connect proper locally approved multi phase socket to supplied device (see
electrical scheme).
Water connection
Before each start of device, make sure that device is filled with water! You can use water from
tap that fulfils the microbiological and chemical requirements. Water must be poured in slowly,
not more than 3 l/min.
Water filling into secondary coat
Use inlet hose to fill water into the double layer of kettle. The device needs to be properly filled
with secondary water before start. Lack of secondary water or use of inappropriate water can
damage the device. At startup program first checks for the presence of secondary water and
demands the filling if no or inappropriate pressure of secondary water is detected.
Inlet hose for filling the
kettle with water
Venting device to unvent the kettle
