FJ200 -CT USER`S MANUAL
V3.0
Page 22
Advanced settings menu
The advanced settings menu follows the settings menu and is entered only with a service
code. This menu is locked due to safety reasons and can be adjusted only by a credited service
partner.
First enter the supplied code to enter the
advanced settings menu.
With pressing up key, value is increased by 1
unit.
With pressing down key, value is decreased
by 1 unit.
With pressing right key, you switch to
another digit.
Water sensor
offset adjustments can be
made by increasing or decreasing the current
temperature value. Pay attention on analog
value when changing.
Milk sensor
offset adjustments can be made
by increasing or decreasing the current
temperature value. Pay attention on analog
value when changing.
Return water sensor
offset adjustments can
be made by increasing or decreasing the
current temperature value. Pay attention on
analog value when changing.
Type of device
can be chosen:
-
P200 High pressure (closed type
devices)
-
P200 Low pressure (open type
devices)
Cooling factor
is a temperature difference
between milk and secondary water when
device is in cooling phase.
Heating factor
is a temperature difference
between milk and secondary water when
device is in heating phase.
