janitza UMG505 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 112

janitza UMG505 Скачать руководство пользователя страница 79

79

= Key1

= Key 2

= Key 3

= Max. value or consumption = Min. value or supply

Clock

Date and time are set to the Middle European
summer time. There is no automatical changeover
from summer to winter time.
Date and time are needed as time information for
highest and lowest value and storage of measured
values in the ring buffer.

Select
In menu

CONF

move

to the indication of
date and time with
key 3.
In this example the
date is 10.08.1998
and the time is
14:27:15.

Change
With

key 1 a number

can be selected and
changed with

key 3.

The selected digit is
flashing.
The text "

EDIT

" ap-

pears. Date and time
stop.

Date and time can be called up and changed in
menu

CONF

. Therefore please change to menu

CONF

(See chapter "configuration").

Y.M

D.H

M.S

EDIT

CONF

Save
When you have set
the actual date and
time, please press
key 1 as often as no
number is flashing
any longer.
Pressing

key 2, the

text

EDIT

disappears

and date and time run
with their new set-
tings.

Y.M

D.H

M.S

CONF

Summer-/Winter time changeover

The UMG505 can carry out an automatical change-
over of the summer/winter time. The following
possibilities are available:
oFF - No summer/winter time changeover.
on - Specific changeover.
Eu - Listed changeover times.

At the date, marked with the arrow downwards, the
time jumps back from 03:00 to 02:00.
At the date marked with the arrow upwards, the time
jumps from 02:00 to 03:00.

Specific changeover
If the summer wintertime changeover is activated
„on“, both changeover times can be entered
individually. The changeover times from the list are
not used.

Listed changeover times
In the UMG505, a list of changeover times is
deposited until year 2020. In this list, the changeo-
ver times are always set to the last weekend in
March and the last weekend in October of each
year.
If the summer/winter changeover is set to "Eu", the
changeover times of this list are used.

Y.M

D.H

M.S

CONF

Select
In menu

CONF

you

scroll to the indication
of date and time with
key 3 and use key 2
to reach the summer
time changeover.
In this example, the
date 25.03.2001 is in-
dicated.

Pressing

key 2 again,

the winter time chan-
geover is indicated.

Summer time changeover

Y.M

D.H

M.S

CONF

Day

Year

Month

Minute

Second

Hour

Y.M

D.H

M.S

CONF

Winter time changeover

«
...
77
78
79
80
81
...
»

Содержание UMG505

















































































































Отзывы:

Нет отзывов