janitza UMG 96 RM-EL, Инструкция по эксплуатации и технические данные

Страница: 51 / 92

51
UMG 96RM-EL
Time recording
The UMG 96RM-EL records the operating hours
and the overall runtime of each comparator,
• where the operating period is measured and displayed
in hours with a resolution of 0.1 h
• and the overall runtime of the comparators is displa-
yed in seconds (when reaching 999999s is displayed
in hours).
The periods are marked by the digits 1 to 6 for
the measured value display enquiry:
keine = operating hours meter
1 = Overall runtime, comparator 1A
2 = Overall runtime, comparator 2A
3 = Overall runtime, comparator 1B
4 = Overall runtime, comparator 2B
5 = Overall runtime, comparator 1C
6 = Overall runtime, comparator 2C
In the measured value display, a maximum of 99999.9 h
(= 11.4 years) can be displayed.
Fig. Measured value indications
Operating hours meter
The UMG 96RM-EL operating
hours meter reading is 140.8h.
This corresponds to 140 hours
and 80 industrial minutes. 100
industrial minutes = 60 minutes.
In this example, 80 industrial
minutes = 48 minutes.
Operating hours meter
The operating hours meter measures the UMG 96RM-EL
recording and displaying time.
The operating period is measured and displayed in hours
with a resolution of 0.1 h. The operating hours meter
cannot be reset.
Overall runtime of comparators
The overall runtime of a comparator is the sum of the run-
times exceeding the comparator result limit value.
The total running time of the comparators can only
be reset by the GridVis software. All running times are
reset simultaneously.