janitza UMG 96 RM-EL, Инструкция по эксплуатации и технические данные

Страница: 32 / 92

32
UMG 96RM-EL
Parameters and measured values
All parameters necessary for operating the
UMG 96RM-EL, e.g. the current transformer data, and
a selection of frequently required measured values are
stored in the table.
The contents of most addresses can be accessed via the
serial interface and the buttons on the UMG 96RM-EL.
Only the first 3 significant digits of a value can be entered
on the device. Values with more digits can be entered
using GridVis.
The device always only displays the first 3 significant
digits of a value.
Selected measured values are summarised in measured
value display profiles and can be shown in display mode
using buttons 1 and 2.
The current measured value display profile and the
current display change profile can only be read and
changed via the Ethernet interface.
Example of the parameter display
On the UMG 96RM-EL
display the value “006” is
shown as the content of ad-
dress “036”. This parameter
reflects the brightness of
the backlighting (0=dark, 9=
bright).
Example of the measured
value display
In this example, the UMG 96
RM-EL display shows the volt-
ages L to N with 230 V each.