janitza UMG 96 RM-EL Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 92

background image

40

UMG 96RM-EL

Manual setting of the subnet mask (SUb)
• When in the programming mode, press button 2 to get

to the subnet mask settings (SUb display).

• Use button 1 to select the desired digit and set

it by pressing button 2. Repeat this step for each digit
in bytes 0 to 3 in a way similar to setting the TCP / IP
device address.

• After repeated display of byte 0 (

no

digit is flashing)

one can set the gateway address.

Manual setting of the gateway address (GAt)
• When in the programming mode, press button 2 to get

to the gateway address settings (GAt display).

• Press buttons 1 and 2 to set the desired gateway ad-

dress in bytes 0 to 3 as described above.

The dynamic IP allocation must also be deactivated to
ensure that the manual settings of the TCP / IP device
address, subnet mask and gateway address are not
overwritten by a DHCP server. To do so set the parame-
ter „dyn IP“ to a value of 0 or 3 (see „IP mode configura-
tion“ table) as described under „Dynamic IP allocation“.

Dynamic IP allocation (dyn)
The dynamic allocation of the TCP / IP settings (device/
gateway address and subnet mask) provides for a fully
automated integration of the device into an existing net-
work with a DHCP server. TCP / IP settings do not need
to be configured manually as they are automatically as-
signed by the DHCP server when the device is started.

Addresses are read out in the programming mode
the same way as in the manual settings.

• Switch to the programming mode as described.

The symbols for the programming mode PRG
and the current transformer mode CT appear
on the display.

• Press button 2 several times to display the dynamic IP

allocation (dYn IP).

• Activate the parameter with button 1 (1st digit flashes)

and then select the last digit (digit flashes) with but-
ton 1. Use button 2 to set the parameter to 2 or 5 in
accordance with the „IP mode configuration“ table).

• Confirm the parameter with button 1 and exit pro-

gramming mode or wait for ca. 60 seconds.

C

Changes will only take effect after you exit
the programming mode.

«
...
38
39
40
41
42
...
»

Содержание UMG 96 RM-EL





























































































Отзывы:

Нет отзывов

Похожие инструкции для UMG 96 RM-EL

Бренд: Kathrein Страницы: 10

Бренд: Larson Davis Страницы: 536

Бренд: VELOCICALC Страницы: 10

Бренд: Kawai Страницы: 8

Бренд: Hanna Instruments Страницы: 2

Бренд: MULTISPAN Страницы: 2

Бренд: Guru Home Systems Страницы: 20

Бренд: RADWAG Страницы: 176

Бренд: Jaquet Страницы: 27

Бренд: MRC Страницы: 14

Бренд: Tonghui Страницы: 65

sound SMART RLT Sport

Бренд: VCA Страницы: 36

Бренд: Hanna Instruments Страницы: 11

ColorTrack Genesis

Бренд: Fresh Roast Systems Страницы: 9

WPA Lightwave S2000

Бренд: biochrom Страницы: 39

Simple Precision PKF

Бренд: KAM Страницы: 22

CONTISYS OBD - V3.0

Бренд: VDO Страницы: 144

Бренд: MED Associates Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды