janitza UMG 96 RM-EL Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 92

background image

47

UMG 96RM-EL

Measured value relay

All 10/12 periods the measured values are calculated
and the readings are displayed on a per second basis.
There are two ways to retrieve the measurement rea-
dings:

• The automatically changing display of selected

measured values, referred to here as measured value
relaying.

• Selection of a measured value display using buttons

1 and 2 from a preselected display profile.

Both methods are simultaneously available. Measured
value relaying is active if at least one measured value
display is programmed with a changeover time greater
than 0 seconds.
If a button is pressed, the measured value displays
of the selected display profile can be browsed. If no
button is pressed for about 60 seconds, the device
switches to the measured value relay and the measured
values from the selected display change profile
of the programmed measured value displays are shown
one after the other.

Changeover time (addr. 039)

Adjustment range: 0 .. 60 seconds
If 0 seconds are set, no changeover takes place between
the measured value displays selected for the measured
value relay.
The changeover time applies for all display change
profiles.

Display change profile (addr. 038)

Adjustment range: 0 .. 3
0 - Display changeover profile 1, by default.
1 - Display changeover profile 2, by default.
2 - Display changeover profile 3, by default.
3 - Customised display changeover profile.

Measured value displays

After return of the power supply, the UMG 96RM-EL
shows the first measured value panel from the current
display profile. In order to keep the selection of meas-
ured values to be displayed arranged in a clear manner,
only one part of the available measured values is pre-
programmed for recall in the measured value display by
default. A different display profile can be selected if other
measured values are required to be shown on the UMG
96RM-EL display.

«
...
45
46
47
48
49
...
»

Содержание UMG 96 RM-EL





























































































Отзывы:

Нет отзывов

Похожие инструкции для UMG 96 RM-EL

Бренд: VeEX Страницы: 2

Бренд: Abbott Страницы: 296

Бренд: Fender Страницы: 20

Бренд: ISKRAEMECO Страницы: 12

RAVTD1760WS Series

Бренд: Ravaglioli Страницы: 24

Бренд: Laser Technology Страницы: 80

Proline Promag 50H

Бренд: Endress+Hauser Страницы: 52

Бренд: E+E Elektronik Страницы: 48

Бренд: TEA Страницы: 10

Бренд: International Light Technologies Страницы: 19

Бренд: Hanna Instruments Страницы: 2

Бренд: Hameg Страницы: 6

Бренд: TA ENGINEERING Страницы: 22

Бренд: SilverNet Страницы: 22

Бренд: IMKO Страницы: 22

Бренд: Cresta Страницы: 45

Бренд: Delmhorst Instrument Co Страницы: 11

Бренд: PASCO Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды