janitza UMG 512 Скачать руководство пользователя страница 91

Страница: 91 / 124

UMG 512

Device master file

The device master file, abbreviated as GSD file,
describes the Profibus characteristics of the UMG 512.
The GSD file is required by the configuration program
of the PLC.

The device master file for the UMG 512 has the file name
"JAN0EDC.GSD" and is included on the data carrier
as part of the scope of the delivery.

Variable definition

All system variables and global variables

can

be individually scaled and converted into one
of the following formats:

•  8, 16, 32 bit integer with and without sign prefix.
•  32 or 64 bit float format.
•  Big or little endian.
•

Big endian = High byte before low byte.

•

Little endian = Low byte before high byte.

Global variables are variables that are defined

by the user in Jasic and are available to each interface
in the UMG 512.

Profibus

Profibus profiles

A Profibus profile contains the data to be exchanged
between a UMG and a PLC. Four Profibus profiles are
preconfigured at the factory.

A Profibus profile can:

•  Retrieve measured values from the UMG,
•  Set the digital outputs in the UMG,
•  Query the status of the digital inputs in the UMG.

Each Profibus profile can hold a maximum of 127 bytes
of data. If more data has to be transferred, simply create
additional Profibus profiles.

• Every Profibus profile has a profile number.

The profile number is sent by the PLC to the UMG.

• Using GridVis, 16 Profibus profiles (profile numbers

0..15) can be edited.

• Additional Profibus profiles (profile numbers

16..255) can be created using Jasic programs.

• Factory pre-configured Profibus profiles cannot

be subsequently changed.

Содержание UMG 512





























































































































Результаты поиска

Содержание UMG 512

Отзывы:

Похожие инструкции для UMG 512

Бренды по названию

Популярные бренды

janitza UMG 512, Руководство по эксплуатации и технические данные

Результаты поиска

Содержание UMG 512

Отзывы:

Похожие инструкции для UMG 512

Бренды по названию

Популярные бренды