Modules 800-CT8-A | 800-CON
www.janitza.de
24
4.4 Connections/controls on 800-CT8-A module
Item Designation
Description
1
4 current measurement inputs in the
group, terminals 9/10, 11/12, 13/14,
15/16
Current measurements I5, I6, I7, I8
2
LED
Lights "green" if the supply of power via the JanBus interface of the basic
device is correct; the device is ready for operation.
3
LED
Lights up "red" at power-up and remains so until completion of
initialization (module not yet initialized). Then there is a switchover to cyclic
data exchange (pos. 4).
4
2 LEDs
Blink “orange" during operation and indicate cyclic data exchange.
5
4 current measurement inputs in the
group, terminals 1/2, 3/4, 5/6, 7/8
Current measurements I1, I2, I3, I4
6
JanBus interface
Connection sockets for the bus connector
7
Bottom bolt
For mounting the module on the DIN rail
8
JanBus interface
Bus connector insertion into the module
9
Bus connector contacts (JanBus)
Connection to the basic device (or connected modules)
10
Bus connector sockets (JanBus)
Connection of additional modules
1
3
5
6
7
7
7
7
9
8
10
2
4
INFORMATION
The current measuring module is supplied with the
necessary screw terminals and bus connectors
(JanBus interface) for connection to the basic device
or other modules.
Содержание 800-CT8-A
