Modules 800-CT8-A | 800-CON
www.janitza.de
30
Fig. Example of a meter and module topology
INFORMATION
·When setting up your meter and module topolo-
gy, bear in mind that the UMG 801 as the basic
device allows the mounting of
up to 10 modules.
·
Always mount components of your JanBus
system from the output bus connector to the
input bus connector (from left to right). This
will avoid an incorrect connection of remote
JanBus systems!
·
Use end brackets and shield clamps with a
strain relief to mount your meter and module
topology on a suitable DIN rail (see chap.
„13.
Technical data - 800-CON transfer module“ on
page 51.
·The recommended data cables can be found in
chap. „5.4 Data cable for connecting the 800-
CON transfer modules“ on page 31.
·When setting up your meter and module topology,
make sure that the maximum bus length of the
JanBus is 100 m.
5.3 Data transfer with 800-CON module
Your 800-CON transfer module (set of 2) in combi-
nation with a basic device (UMG 801) and current
measuring modules serve to connect remote mea-
surement points.
With the transfer modules, you can implement
meter and module topologies (e.g. UMG 801 with
800-CT8-A current measuring modules) with flexible
arrangement of your DIN rails in the switchboard
cabinet or small distribution board (for DIN rail types,
see chapter „13. Technical data - 800-CON transfer
module“ on page 51).
Содержание 800-CT8-A
