janitza 800-CT8-A, Руководство пользователя и технические данные

Страница: 32 / 58

Modules 800-CT8-A | 800-CON www.janitza.de
32
6. PC connection
6.1 PC connection of the current measuring
modules via the basic device (UMG 801)
Configure your current measuring module via
the display and the buttons on your basic device
(UMG 801).
Use the
Ethernet interface of the basic device
to
connect your module/module series to a PC. The
PC, with the GridVis
® software or generic OPC UA
client installed, is used to configure or read out your
modules/module series.
6.2 PC connection of the basic device
(UMG 801) with current measuring module
or your module series via the Ethernet
interface
Connection to a DHCP server and PC.
The DHCP server automatically assigns IP addresses
to the basic device (with modules) and the PC.
DHCP
server
Switch/
Router
PC with GridVis
®
Patch cable Patch cable
UMG 801 with modules
INFORMATION
Detailed descriptions of connection via the Ethernet
interface of the basic device can be found in the
UMG 801 user manual.
PC with GridVis ®
Patch cable
UMG 801 with modules
PC direct connection to the basic device with
modules.
PC and basic device require a fixed IP address.
INFORMATION
Further information on PC connections of the basic
device can be found in the UMG 801 user manual.