janitza 800-CT8-A, Руководство пользователя и технические данные

Страница: 19 / 58

www.janitza.de
19
Modules 800-CT8-A | 800-CON
3. Press your module with the bus connector
onto the DIN rail (for suitable DIN rail types see
chapter „11. Technical data - 800-CT8-A current
measuring module“ on page 47) until the 4
bottom bolts snap into place.
UMG 801
800-CT8-A module
With bus connector
click!
Bottom bolts
DIN rail
4. Push the contacts of your module bus connector
into the sockets of the basic device bus
connector (or into the sockets of the attached
module) so that the bus connectors (devices) are
coupled.
Fig.: Side view, UMG 801 and 800-CT8-A module
Internal bus connector
UMG 801
800-CT8-A module
5. Then cable your module and apply voltage to the
basic device (system).
Fig.: Side view, UMG 801 and 800-CT8-A module
INFORMATION
The basic device automatically recognizes the
module during the power-up procedure!
INFORMATION
Before coupling the module, check to be certain
your basic device is de-energized! Coupling
while energized can destroy your basic device or
module!