background image

Chases

 

Chase

 

controls

 

 

9.

 

Chases

 

Chase

 

controls

 

A Chase is made up of one or more steps that you play back in sequence.  The 
buttons, beside the Chase fader provide quick access to all the Chases you record. 

Recording

 

a

 

Chase

 

There are two ways to record a Chase. 

1.

 

Auto

 

Chase

 

This method lets you record a complete chase with just a few clicks. 

1.

 

Set the levels and colours for your lights in the pattern you want at the start 
of your Chase. For example if you wanted a Chase that has two blue lights 
running along a line of red lights you could start like this: 

2.

 

Press Record button. The leds in the select buttons flash to show which 
channels will be included in the chase. 

3.

 

Press one of the four Chase buttons. Stage CL displays the Auto Chase’ 
window: 

 

4.

 

Press the ‘Auto’ button. Stage CL automatically builds a Chase with as many 
steps as you have fixtures selected. In the example above there were 12 
fixtures selected so the chase will have 12 steps. The first four steps will look 
like this: 

Stage

 

CL

 

User

 

Guide,

 

Version

 

0.4

 

9

1

 

Содержание Stage CL









































































Отзывы: