HSI
Channel
strip
About
the
console
controls
This control.. does this…
Adjusts the Saturation of the channel. For
example if you had set a Red colour with the
Hue control you can use the saturation control
to adjust from a deep red to pale red to white
Saturation
dial
Adjusts the Hue (or colour) of the channel.
Hue dial
Select LED
shows that a channel is selected. For example
when grouping channels and for recording
selects the channel for recording or when you
want to group channels and adjust their
colour with one set of colour controls.
Select button
Colour mimic
LED
shows the intensity and colour of the channel.
Channel fader fades the intensity of the channel from 0 to
100%
The Stage CL uses ‘Fader gating’. This means
that if the fader isn’t set at the same level as
the actual channel output you have to move
the fader up or down to match the output
level before the fader takes control.
You might need to do this when switching the
faders between Scene and Channel mode or if
you have used the Clear button to clear all
output from the channels
flashs the intensity of the channel to full while
held down.
Flash button
& LED
Fixture
Master
Control
The fixture master control scales the intensity of the 12 fixture channels
Â
The channel faders can also be switched to control Scenes and Chases.
See
Recording a Scene on page 7-1.
5
‐
2
Stage
CL
User
Guide,
Version
0.4
