3
4
Connecting Filtration System to Pump
Slide (2) VHPR145 Hose Clamps on to the VHPR152 3/4” Braided Hose. Slide one end of braided hose onto the hose barb coming from the filter system and the
other end onto the barb going into the pump as shown below. Hose should be pushed onto barbs until stopped by adapter collars.
Once hose is fully onto barbs, slide a hose clamp to 1/4” from end of installed hose. Using a flat head screwdriver, tighten clamp until secure. Repeat for other
end of the hose.
IS275-17L
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Section N - Page 2/2
Section N
Auto Drain Kit Installation & Assembly
Section N
IN
OUT
IN
OUT
IN
OUT
Connecting Pump to System
Following the Slip Lock Guidelines in
Section E
, connect ring to 3/8” High Pressure Nylon Tube to pump using the adapter installed in
Step 2
.
IN
OUT
