Secure the Flex Coupler to the VHPP41, VHPP57, or VHPP137 Pump Shaft and Motor Shaft
Slide the flex coupler halves as far as they will go onto the pump shaft and motor shaft as shown below. Secure using a 3 MM Hex Key to tighten the set screws.
The set screw on the flex coupler half that is inserted into the bell and onto the pump shaft can be accessed using the slit in the top of the bell as indicated below.
IN
OUT
Access slit in top of bell
enables tightening of
flex coupler set screw
3
IS275-17L
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Section H - Page 2/3
Section H
Motor & Pump Assembly & Installation
Section H
IN
OUT
VHPP41
VHPP57 (
shown
)
VHPP137
Assembling VHPP41, VHPP57, or VHPP137 Pump to Motor
Using a 9/16” socket and (4) 3/8”-16 x 1” Hex Bolts and (4) 3/8” Split Lock Washers, assemble and secure the pump to the motor as shown below.
4
