![background image](http://html1.mh-extra.com/html/jaeco/wrex/wrex_setup-instructions_3194158023.webp)
Select and Pre-fit Forearm Support
Attach Forearm Support to WREX Arm
1. Measure the distance from the Olecranon to
the Ulna Styloid then subtract one inch.
Insure size and side is correct from the chart
attached page 4-8.
2. Place the clients arm into the forearm
support. When the clients arm is strapped
in, the fit should be snug but not tight. The
Forearm support circumference can be
adjusted by squeezing the edges of the trough
together.
This does require a great deal of
force. Use of a vice or small rubber mallet may
be required.
Alternately padding may be added
to insure a intimate fit.
3. Remove the clients arm from the Forearm
Support.
1. While depressing the
button on the side
of
the Forearm Support Slide Saddle.
2. Slide the L-Bar into the Slide Saddle from the
top.
3. Release button on the Slide Saddle to lock the
Forearm Support in the first (highest) position
on the L-Bar.
3-2
Содержание WREX
