![background image](http://html1.mh-extra.com/html/jaeco/wrex/wrex_setup-instructions_3194158013.webp)
Preparing Mount Base
MR-8
Mount Base Installation
For use on some Invacare and Motion Concept Seating
Systems
Note:
Adjustments in position may be necessary for
optimal function.
MR-8
Mount Base
Adapter
Attachment Hole
T-Nut
Locking Knob
Arm Mount Base
1. Locate and mark an area 2 to 8 inches below the
clients shoulder on the Keyed Back Post of the
wheelchair.
2. Locate and remove ( if applicable) the plastic cap
from the top of the Keyed Back Post of the
wheelchair.
Keyed
Back Post
2-6
Alignment Slot
T-Nut
Screws
Содержание WREX
