2-10
MR-7
Mount Base Installation
For use on some Permobil and Other Seating Systems
Preparing Backrest and Mount Base
MR-7
Mount Base
Adapter
Mount Screw
Reinforcement
Washer
1. Remove backrest cushion.
2. Tape the template on the back of the backrest 1 ½ to
2 inches down from upper edge and as close to the
midline as possible.
Note:
Place Base Drill Template on flattest area of
backrest
4. Use drill bit supplied and drill the two marked holes.
5. Orient the Arm Mount Base as shown in illustration.
Insert the Mount Base Screw (supplied with
Arm Mount Base) thru the Attachment Hole to
the MR-7 Mount Adapter. Using large T-Wrench
secure these two parts.
Attachment Hole
Locking Knob
Arm Mount Base
Alignment Slot
Содержание WREX
