BLADE SHARPENING PROCEDURE
VA4000 SLICERS
WORK INSTRUCTION
WI-MAINTENANCE-003; BLADE SHARPENING
REVISION:
02
DATE:
09-07-16
AUTHOR
: G. IDE
Page 6 of 11
11.
MOUNT THE SHARPENING DEVICE
11.1. Visually locate the slot on the bottom of
the thickness plate.
11.2. With the sharpener alignment pin facing
towards the thickness plate, proceed to
lower the sharpener into the space
between the thickness plate and the end
of the carriage.
11.3. Align the pin with the slot and lift the
sharpener to engage the pin with the slot.
11.4. Pull upward on the black knob atop the
sharpener. Move the sharpener over the
thickness plate and align the retracted
pin with the hole in the top of the
thickness plate.
11.5. Release the knob allowing the pin to
engage the hole securing the sharpener
to the thickness plate
